
Rewires in Fleet
Full and partial rewires for Fleet's older 1930s–1960s stock, replacing tired rubber and lead-sheathed cable with a properly certified, RCD-protected installation.
See the full serviceYour local Fleet electrician
Adam Jackson is based in Fleet and works the town daily, from the 1930s semis near the station to the newer estates off Hitches Lane. Fixed prices, plain-English advice, and a NAPIT-certified job every time.
Free quotes, fixed prices by job, and same-day advice over the phone, call 07828 148715.
13 years
On the tools as an electrician
NAPIT 79130
Approved Domestic Installer
From £180
Fixed EICR price by property size
£2m
Public liability insurance
Covering Fleet
Fleet is a mixed bag electrically, and that is exactly why fixed-size pricing matters here rather than guesswork on the doorstep. Around the town centre and towards Church Crookham you get a good number of 1930s to 1960s semis and detached houses, many still running on rewireable fuse boards or early MCB boards fitted decades ago without RCD protection on the sockets. Out towards Elvetham Heath and Ancells Farm the housing is almost entirely 1990s and 2000s build, with plastic consumer units, dual RCD boards and cabling that generally tests well but often has extras bolted on afterwards, garden lighting, hot tub supplies, home office circuits, that were never properly assessed against the rest of the installation.
Fleet Pond and the roads running down towards it sit on some of the older plots in town, and it is common to find a mix of original 1950s wiring alongside a rewired kitchen extension from the last ten years, which is exactly the kind of installation an EICR is built to untangle. Properties backing onto the pond and the nearby woodland also see a fair number of outdoor electrics jobs, pond pumps, shed supplies, and outside sockets that were never run on their own RCD-protected circuit.
Fleet town centre itself, along Fleet Road and around the Hart Shopping Centre, has a run of older terraced and converted properties above shops, plus flats that come with their own quirks around shared supplies and landlord responsibilities. A good number of these are let out, and Fleet has a steady rental market that means EICR renewals come round regularly, the five-year cycle catches people out more often than not.
Newer developments off Hitches Lane and around Pale Lane have brought a wave of 2010s and 2020s builds into the town, generally with 18th Edition compliant boards and SPD protection already fitted, but even these need proper certification when anything is added, an EV charger, a converted garage, a garden room. Being asked to certify someone else's work on one of these newer builds without seeing the original installation certificate is a regular occurrence, and it is handled the same honest way every time: test it properly rather than assume it is fine because the house is young.
Because Adam is based in Fleet itself, response times here are usually the tightest of any town on the round, often same-day for smaller jobs booked in the morning, and rarely more than a couple of working days for anything that needs scheduling in around existing work. Parking is straightforward on most Fleet streets, though the town centre and roads near the station can need a permit or pay-and-display awareness, which gets factored into the quote rather than sprung on you afterwards.
A mix of 1930s–1960s semis near the centre, 1990s–2000s estates around Elvetham Heath and Ancells Farm, and newer builds off Hitches Lane and Pale Lane.
EICRs on older fuse-board properties, consumer unit upgrades on pre-RCD boards, and certification for extensions, home offices and outdoor supplies on newer estates.
Being based in Fleet, same-day visits are often possible for smaller jobs, and most other work is booked within a few working days.
Most residential streets are easy to park on; town centre and station-adjacent roads sometimes need permit awareness, which is factored into the quote.
What we do here
Every service below is available across Fleet, from Church Crookham to Elvetham Heath, priced fixed and explained plainly before any work starts.

Full and partial rewires for Fleet's older 1930s–1960s stock, replacing tired rubber and lead-sheathed cable with a properly certified, RCD-protected installation.
See the full service
New circuits and full installations for extensions and garden rooms going up across Fleet's newer estates, tested and certified to current regulations from day one.
See the full service
Straight-swap consumer unit replacement for Fleet homes still running old fuse boards, from £650, with dual RCD protection fitted as standard.
See the full service
Board upgrades for Elvetham Heath and Ancells Farm properties that have outgrown their original consumer unit after extensions or added circuits.
See the full service
Sockets, lighting and general indoor electrical work for Fleet homes of every age, from Victorian terraces near the centre to modern estate builds.
See the full service
Garden lighting, shed and pond supplies around Fleet Pond, and outside sockets fitted with their own RCD protection rather than spurred off an indoor circuit.
See the full service
Fixed-price EICRs for Fleet landlords and homeowners, from £180, covering everything from town-centre flats to Ancells Farm family homes.
See the full service
Electrical Installation Certificates for new circuits, rewires and consumer unit work carried out anywhere in Fleet, notified through NAPIT where required.
See the full service
Tracing tripping breakers and dead circuits in Fleet properties, particularly older homes near the town centre with decades of added wiring behind the walls.
See the full serviceWhy Fleet households call
Fleet is home turf. That means fewer surprises about the housing stock, faster response, and a working knowledge of what tends to go wrong where.
Adam lives and works from Fleet, so there is no long drive tacked onto the quote and no guessing about which estates have which type of consumer unit.
Registration 79130, with certificates issued on completion and notified through NAPIT where Building Regulations require it.
NVQ Level 3 qualified and AM2 passed, with over a decade of hands-on experience across exactly this mix of old and new housing.
EICRs and consumer unit swaps are priced by size before anyone arrives, so there is no creeping hourly rate once the job starts.
£2m public liability and £250,000 professional indemnity cover, which matters for landlords and homeowners who need it stated on paper.
Every fault, code and recommendation is explained in terms that make sense before you agree to anything, not buried in jargon on a report.
Local wiring issues
Every town has its own patterns. In Fleet, the split between older housing near the centre and newer estates further out produces two quite different sets of recurring issues.
A good number of houses along and around Fleet Road and towards the station still have their original fuse board, sometimes with rewireable fuse carriers that have been there since the 1960s or 70s. These boards have no RCD protection on socket circuits, which means a fault that would trip a modern board instantly can instead run undetected until something more serious happens.
An EICR on one of these properties routinely turns up insulation resistance readings sitting right at the edge of acceptable, particularly where cabling runs through an unheated loft. In most cases the honest recommendation is a consumer unit replacement as a first step, sometimes followed by targeted rewiring of the worst-affected circuits rather than a full rewire straight away.
Newer estate housing generally tests well on the original installation, but very few of these properties still look like they did when they were built. Loft conversions, home offices, garden lighting and hot tub supplies get added over the years, often by different people at different times, and not always with a certificate to show for it.
The problem is less about any single addition and more about the cumulative load and protection arrangement. A circuit that was fine carrying its original load can trip repeatedly once three or four extras have been spurred off it, and without seeing the full picture it is impossible to know whether that is a nuisance trip or an early warning sign.
Properties near Fleet Pond and the surrounding green space have a higher-than-average number of garden features, pond pumps, outdoor lighting, sheds used as workshops or home offices. These are frequently wired as an afterthought, spurred off an indoor ring rather than run as their own RCD-protected outdoor circuit.
Damp, cable damage from garden work, and simple wear from being outdoors all take their toll faster than most people expect. Testing these circuits properly, rather than assuming they are fine because the light still comes on, catches problems well before they become dangerous.
Fleet has a steady rental market, particularly among flats above shops in the town centre and houses let to families and commuters. Landlords are legally required to have a satisfactory EICR at least every five years and provide a copy to tenants, and it is a requirement that catches people out more often on renewal than on the first inspection.
The most common issue on renewal is not a dramatic fault but an accumulation of small C3 recommendations from the previous report that were never actioned, which have since become C2 issues requiring remedial work before a new report can pass.
How it works
We look at the board, the circuits and the parts of the installation the job touches, so the quote is based on what is actually there rather than an assumption.
Findings are explained in plain English: what needs doing now, what can wait, and what it costs. You get a fixed price before anything starts.
Work is carried out to BS 7671 with dust sheets down, isolations planned around your day, and power back on each evening wherever the job allows.
Every circuit worked on is tested and the readings recorded, continuity, insulation resistance, polarity, earth loop impedance and RCD operation.
You get the correct certificate for the work, notified through NAPIT where Building Regulations require it, plus a walkthrough of what changed.
Common questions
Yes. Fleet is where Jackson's Electrical is based, and that covers the town centre, Church Crookham, Elvetham Heath, Ancells Farm and the surrounding roads. If you are just outside that area, call and you will get a straight answer rather than a maybe.
Being based in Fleet itself, same-day visits are often possible for smaller jobs if you call in the morning. Larger jobs that need scheduling are usually booked within a few working days, always within the Monday to Saturday working hours.
EICRs are priced by property size: £180 for a 2-bed, £200 for a 3-bed, £240 for a 4-bed and £280 for a 5-bed. Larger or unusually laid out properties are quoted after a short conversation about the number of circuits. Quotes are always free.
Emergency call-outs are available on weekdays and some Saturdays. They are not available on Sundays, though the phone is answered every day. Booked work runs Monday to Friday 8am to 4:30pm and Saturday 8am to 12pm, and genuinely urgent Fleet jobs are prioritised where the diary allows. If it is a dangerous situation, say so when you call.
Private rented properties in England need a satisfactory EICR at least every five years, with a copy given to tenants and available for the local authority if requested. Any C1, C2 or FI items found need remedial work and written confirmation that it has been carried out before the report is treated as satisfactory.
Most residential streets in Fleet, including Church Crookham and Elvetham Heath, are easy to park close to. Town centre and station-adjacent addresses sometimes have permit schemes or pay-and-display restrictions, and this is factored into the visit when the job is booked rather than being a surprise on the day.
Yes. Where work is notifiable, it is registered through NAPIT as an Approved Domestic Installer, registration 79130. You get the correct certificate for the job on completion, whether that is an EIC for new work or an EICR for an inspection.
A straight-swap consumer unit replacement, same position, starts from £650 for a 6-way board, £800 for 8-way, £850 for 10-way and £900 for 12-way. This covers the many older fuse boards still found in Fleet's pre-1970s housing.
It is worth considering, particularly on older stock near the town centre where the survey often just says the electrics 'appear dated'. An EICR turns that vague wording into a costed, specific list of what is safe, what needs fixing and what can wait, which is useful either for negotiation or peace of mind.
Jobs regularly take place in Farnborough, Farnham, Yateley and Aldershot alongside Fleet itself, so if you are on the edge of town or just over the border into one of those areas, it is still well within the working area.
Prefer to talk it through? Start on the homepage or send your job details for a free quote.
Free, no-obligation quote
Tell Adam your postcode and what you need doing, and you will get a straight answer on price and timing, no hard sell, no inflated call-out fee just because it is a small job.